Propane cylinder overfilling prevention devices (OPD)

Published on May 19, 2009
An Overfilling Prevention Device (OPD) is a safety device incorporated into the filling valve of a propane cylinder (i.e., those used on gas grills, RVs, etc.). The device shuts off the flow of gas to a cylinder after 80% capacity has been reached. This limits the potential for release of gas when the cylinder is heated, averting a fire or possible injury.

Facts & figures

  • As of April 1, 2002, OPDs are required on all propane cylinders between 4 and 40 pounds propane capacity, per the 1998 edition of NFPA 58, Liquefied Petroleum Gas Code. Cylinders of this size manufactured after September 30, 1998, were required to have an OPD. A typical gas grill cylinder holds about 20 pounds of propane.
  • Propane cylinders with OPDs can be identified by a triangular hand-wheel (pictured right). Some earlier model cylinders were produced with a round hand-wheel but "OPD" is stamped on the brass valve body.
  • After April 1, 2002, propane cylinders not equipped with an OPD must be retrofitted with the device before refilling can occur or properly disposed of and replaced with an OPD-equipped cylinder.
  • Many propane dealers will retrofit older cylinders with an OPD. As there is a charge for this, it may be more economical to replace the entire cylinder, especially if it is rusty. In many parts of the U.S., exchange cylinder racks can be used to swap an empty cylinder without an OPD for a full cylinder equipped with an OPD, for a nominal fee, eliminating the need to dispose of the cylinder or to have it retrofitted.
  • Dispose of propane cylinders safely. Questions about safe disposal should be answered by local fire departments, hazardous waste collection sites, or propane refillers.
  • The 2001 edition of NFPA 58  modified requirements to exempt horizontal cylinders manufactured before October 1, 1998, from requiring OPDs. Also exempt are cylinders used for industrial trucks, industrial welding and cutting gases (these cylinders must be labeled with their use).

Updated: 3/02

Featured Product
NFPA 58 Code and Handbook Set, 2014 Edition
Cover all the LP-Gas safety bases and protect against deadly hazards with the best-value 2014 NFPA 58 and Handbook Set!
Item #: 58SET14

NFPA 59: Utility LP-Gas Plant Code
Follow new safety rules for LP-Gas utility gas plants in NFPA 59.
Item #: NFPA_59

NFPA 290: Standard for Fire Testing of Passive Protection Materials for Use on LP-Gas Containers
Use NFPA 290 to evaluate the fire performance characteristics of passive protection materials applied to the exterior LP-gas containers in a torch fire environment.
Item #: NFPA_290