NFPA 1403: Standard on Live Fire Training Evolutions
Current Edition: 2012 Next Edition: 2017

Alerts: Receive e-mail updates on this document Manage my alerts

Alert Me
Please confirm you would like to be alerted the next time we post new information about document .
Alerts will be sent to the e-mail address on your user profile:

Thank you for signing up for alerts.

Committee members: Sign-in to view your documents.
Buy This Edition
NFPA 1403:
2012 Edition
Item #: 140312
List: from $42.00
Member: from $37.80

The next edition of this standard is now open for Public Input (formerly proposals).

Edition to display:
What is NFPA 1403?
NFPA 1403: Document Scope
1.1* Scope. 1.1.1 This standard shall contain the minimum requirements for training all fire suppression personnel engaged in firefighting operations under live fire conditions. 1.1.2 The minimum requirements for training shall comprise a basic system that can be adapted to local conditions to serve as a standard mechanism for live fire training.
NFPA 1403 provides minimum requirements for conducting live fire training to ensure they are conducted in safe facilities and a safe manner for participants. Official document scope
What does NFPA 1403 address?
General requirements include permits, student prerequisites, safety officer, instructors, fire control team, PPE, communication, EMS, water supply, fuel materials, and preburn plan/briefing. Separate chapters detail specific provisions related to acquired structures, gas-fired live fire training structures, non-gas-fired live fire training structures, exterior live fire training props, and reports and records.Table Of Contents.
NFPA 1403, 2012 Edition: Archived Revision Information
Report on Proposals (ROP)
Report on Proposals (ROP)
Proposals can be submitted for text to be amended or included in NFPA Codes and Standards. Following the Call for Proposals period, the responsible Technical Committee or Panel holds a meeting to consider and act on all submitted proposals. The committee or panel may also develop its own proposals. A document known as the Report on Proposals (ROP) is prepared containing all the Public Proposals, Technical Committees' action on each Proposal, as well as all Committee-generated proposals. The ROP for the document in question is submitted for the approval of the responsible TC or Panel by a formal written ballot. If the ROP does not receive approval via written ballot in accordance with NFPA rules, the Report is returned to the committee for further consideration and is not published. If the necessary approval is received, the ROP is published in a compilation of Reports on Proposals issued by NFPA twice yearly for public review and comment, and the process continues to the next step. The ROP is published and widely distributed and anyone may download or request a copy.
The Preprint appended to the ROP above shows how the draft of the proposed 2012 edition looks based on NFPA staff’s reading of the Committee Actions contained in the Technical Committee Report (i.e., the Committee Actions in the Report on Proposals).
ROP Meeting Notice
ROP Meeting Notice
Note: Please contact the appropriate staff liaison (listed on the Technical Committee tab) for information on attending an NFPA Technical Committee meeting as a guest. Read NFPA"s Regulations Governing Committee Projects (Section 3.3.3.3) for further information.
ROP Meeting Agenda
ROP Meeting Minutes
ROP Ballot
ROP Ballot
The ballots posted on this page are for public information only. Voting on ballots is permitted by committee members only. See NFPA Regulations Governing Committee Projects, Section 3.3.4.
Ballot (PDF, 42 KB)
Ballot Circulation (PDF, 42 KB)
Ballot Final (PDF, 42 KB)
Report on Comments (ROC)
Report on Comments (ROC)
Once the ROP becomes available, there is a 60-day comment period during which time anyone may submit a public comment on the proposed changes documented in the ROP. The committee or panel reconvenes at the end of the comment period and acts on all public comments. This committee or panel may also develop its own comments. As before, approval obtained via written ballot in accordance with NFPA's Regulations is required on all committee and panel actions. All of this information is compiled into a second Report, called the Report on Comments (ROC), which like the ROP, is published and made available for public review for a seven-week period.
Report on Comments (ROC) (PDF, 693 KB)
ROC Meeting Notice
ROC Meeting Notice
Note: Please contact the appropriate staff liaison (listed on the Technical Committee tab) for information on attending an NFPA Technical Committee meeting as a guest. Read NFPA"s Regulations Governing Committee Projects (Section 3.3.3.3) for further information.
ROC Meeting Agenda
ROC Meeting Minutes
ROC Ballot
ROC Ballot
The ballots posted on this page are for public information only. Voting on ballots is permitted by committee members only. See NFPA Regulations Governing Committee Projects, Section 3.3.4.
Ballot (PDF, 167 KB)
Ballot Form (PDF, 73 KB)
Ballot Circulation (PDF, 38 KB)
Ballot Final (PDF, 38 KB)
Motions Committee Report (NITMAM)
Motions Committee Report (NITMAM)
Proposed NFPA documents will be presented for action at the applicable Annual (June) Association Technical Meeting only when proper Amending Motions (Notice of Intent to Make a Motion - NITMAM) have been certified by the Motions Committee of the Standards Council as a proper amending motion. Documents that receive no motions will not be presented at the meeting and instead will be forwarded directly to the NFPA Standards Council for action on issuance. More about the codes and standards making process including NITMAM.
No NITMAMs
Association Technical Meeting
Consent document not presented at Association Technical Meeting. Document issuance by Standards Council: 12/13/2011
Archived revision information
NFPA 1403, 2012 Edition: Archived Revision Information
View archived proposals, comments and other records related to the development of this edition.
Read the archived revision information
Tentative Interim Amendment (TIA)
Tentative Interim Amendment (TIA)
Tentative Interim Amendments (TIAs) are amendments to an NFPA document processed in accordance with Section 5 of the Regulations Governing Committee Projects. They have not gone through the entire codes and standards-making process of being published in a ROP and ROC for review and comment. TIAs are effective only between editions of the Document. A TIA automatically becomes a proposal of the proponent for the next edition of the Document, as such is then subject to all of the procedures of the codes and standards making process. TIAs are published in NFPA News , NFCSS, and any further distribution of the document after being issued by the Standards Council.

Requests for TIAs shall be clearly worded to provide the recommended revision and the reason as to why it is of an emergency nature requiring prompt action. Submissions shall be in writing, addressed to the Standards Council Secretary, NFPA, 1 Batterymarch Park, Quincy, MA 02169-7471. The submitter must also provide the appropriate endorsments in writing of two members of the applicable technical committee or technical correlating committee. For further information on submitting a TIA, please contact Codes and Standards Administration.

TIA 12-1, Reference: 4.16 (issued 10/22/2013) (PDF, 19 KB)
View the document online (read only)
Articles and Reports

Find a code or standard

Related Products
National Fire Codes Subscription Service All Access
Item #: NFCSSTERHB
List: from $1,295.00
Member: from $1,165.50





cartADD TO CART
Format: Book
Bottom blue line

Free access     NEC      Sparky the Fire Dog        NFPA Conference & Expo         NFPA Journal         Sprinklers       Wildland fires