NFPA 51: Standard for the Design and Installation of Oxygen-Fuel Gas Systems for Welding, Cutting, and Allied Processes

Alerts: Receive e-mail updates on this document

Alert Me
Please confirm you would like to be alerted the next time we post new information about document .
Alerts will be sent to the e-mail address on your user profile:

Thank you for signing up for alerts.

The next edition of this standard is now open for Public Comment.

What is NFPA 51?
NFPA 51: Document Scope
1.1 Scope. 1.1.1 This standard applies to the following: (1) Design and installation of oxygen–fuel gas welding and cutting systems and allied processes (see 3.3.2), except for systems meeting the criteria in 1.1.5 (2) Utilization of gaseous fuels generated from flammable liquids under pressure where such fuels are used with oxygen (3) Storage on the site of a welding and cutting system installation of the following: (a) Gases to be used with such systems where more than one cylinder each of oxygen and fuel gas are stored in any single storage area [includes storage of more than one cylinder each in any single storage area even though all such stored cylinders may be intended for use in systems of the kind described in 1.1.5(1)] (b) Calcium carbide 1.1.2 Unless specifically indicated otherwise, the term welding and cutting systems shall be considered to include allied processes in this standard. 1.1.3 Where only a portion of a fuel gas system is to be used for welding, cutting, or allied processes, only that portion of the system need comply with this standard. 1.1.4 Where only a portion of an oxygen system is to be used with fuel gas for welding, cutting, or allied processes, only that portion of the system need comply with this standard. 1.1.5 This standard shall not apply to the following: (1)*Systems consisting of a single cylinder not exceeding 3.4 m3(120 ft3) of oxygen and a single cylinder not exceeding 3.4 m3 (120 ft3) of fuel gas used for welding and cutting (2) Systems in which fuel gases are not to be used with oxygen, as described in NFPA 54, National Fuel Gas Code, and NFPA 58, Liquefied Petroleum Gas Code (3) The manufacture of gases and the filling of cylinders (4) Storage of empty cylinders (5) Compressed air–fuel gas systems
This standard provides safety requirements for oxygen-fueled gas cutting and welding systems to reduce the risk of fires and explosions. Official document scope
What does NFPA 51 address?
Guidance is provided on cylinder storage, system manifolding and piping, and associated protective equipment such as regulators. NFPA 51 also includes provisions for the use of acetylene generators, calcium carbide storage for acetylene generators, and mobile acetylene trailer systems. Table of Contents

Find a code or standard

Bottom blue line

Customer Support:  Help

Codes and Standards:  Complete list   Purchase   Free Access   National Fire Code Subscription Service (NFCSS)

On the Web:  Blogs  Buyers' Guide  Electric Vehicle Safety Training  Fire Adapted Communities  Fire Prevention Week  Fire Sprinkler Initiative  Firewise    

NEC® Buyers' Guide   nec connect   Sparky the Fire Dog®

  Twitter  LinkedIn  YouTube        RSS feeds  Flickr

Home | Terms of use | Privacy policy | © National Fire Protection Association (NFPA) 2016