PYR 1129 Standard Method of Fire Test for Covered Fuse on Consumer Fireworks 2013 Edition

Chapter 1 Administration
1.1 Scope
1.2 Purpose
Chapter 2 Referenced Publications
2.1 General
2.2 NFPA Publications
2.3 Other Publications
2.4 References for Extracts in Recommendation Sections
Chapter 3 Definitions
3.1 General
3.2 NFPA Official Definitions
3.3 General Definitions
Chapter 4 Open Flame Test Procedure
4.1 Summary of the Method
4.2 Test Equipment
4.3 Geometry and Construction of the Open Flame Test Environment
4.4 Attachment of the Test Sample to the Equipment
4.5 Number of Tests
4.6 Application of Flame to the Test Sample
4.7 Timing of the Open Flame Exposure
4.8 Environmental and Safety Conditions
4.9 Interpretation of Results
4.10 Acceptance Criteria
Chapter 5 Hot Surface Contact Ignition Test Procedure
5.1 Test Equipment
5.2 Geometry and Construction of the Hot Surface Fire Test Environment
5.3 Attachment of the Test Sample to the Equipment
5.4 Number of Tests
5.5 Application of Hot Surface to the Test Sample
5.6 Timing of the Hot Surface Exposure
5.7 Environmental and Safety Conditions
5.8 Interpretation of Results
5.9 Acceptance Criteria
Chapter 6 Incendiary Spark Ignition Test Procedure
6.1 Test Equipment
6.2 Geometry and Construction of the Incendiary Spark Test Environment
6.3 Attachment of Test Sample and the Incendiary Spark Ignition Source
6.4 Number of Tests
6.5 Timing of the Incendiary Spark Ignition Source
6.6 Timing of the Incendiary Spark Ignition Source
6.7 Environmental and Safety Conditions
6.8 Interpretation of Results
6.9 Acceptance Criteria
Chapter 7 Test Report
7.1 Video Test Record
7.2 Test Documentation
7.3 Written Report for Associated Fuse Covers over Fuse or Ignition Points
7.4 Written Report for Packaging Used as Covered Fuse
7.5 Written Report Failed Test Documentation
7.6 Written Report Description of Fireworks Sample
7.7 Covered Fuse Markings
Annex A Explanatory Material
Annex B Informational References
Index