NFPA® 2001 Standard on Clean Agent Fire Extinguishing Systems 2012 Edition

Chapter 1 Administration
1.1 Scope
1.2 Purpose
1.3 Units
1.4 General Information
1.5 Safety
1.6 Environmental Factors
1.7 Retrofitability
1.8 Compatibility with Other Agents
Chapter 2 Referenced Publications
2.1 General
2.2 NFPA Publications
2.3 Other Publications
2.4 References for Extracts in Mandatory Sections
Chapter 3 Definitions
3.1 General
3.2 NFPA Official Definitions
3.3 General Definitions
Chapter 4 Components
4.1 Agent Supply
4.2 Distribution
4.3 Detection, Actuation, Alarm, and Control Systems
Chapter 5 System Design
5.1 Specifications, Plans, and Approvals
5.2 System Flow Calculations
5.3 Enclosure
5.4 Design Concentration Requirements
5.5 Total Flooding Quantity
5.6 Duration of Protection
5.7 Distribution System
5.8 Nozzle Choice and Location
Chapter 6 Local Application Systems
6.1 Description
6.2 Hazard Specifications
6.3 Clean Agent Requirements
6.4 Nozzles
6.5 Location and Number of Nozzles
6.6 Operation
Chapter 7 Inspection, Testing, Maintenance, and Training
7.1 Inspection and Tests
7.2 Container Test
7.3 Hose Test
7.4 Enclosure Inspection
7.5 Maintenance
7.6 Training
7.7 Approval of Installations
7.8 Safety
Chapter 8 Marine Systems
8.1 General
8.2 Use and Limitations
8.3 Hazards to Personnel
8.4 Agent Supply
8.5 Detection, Actuation, and Control Systems
8.6 Additional Requirements for Systems Protecting Class B Hazards Greater Than 6000 ft3 (170 m3) with Stored Cylinders Within the Protected Space
8.7 Enclosure
8.8 Design Concentration Requirements
8.9 Distribution System
8.10 Nozzle Choice and Location
8.11 Inspection and Tests
8.12 Approval of Installations
8.13 Periodic Puff Testing
8.14 Compliance
Annex A Explanatory Material
Annex B Cup Burner Method for Determining the Minimum Concentration of Gaseous Agent for Flame Extinguishment
Annex C Enclosure Integrity Procedure
Annex D Enclosure Evaluation
Annex E Informational References
Index