NFPA® 276 Standard Method of Fire Test for Determining the Heat Release Rate of Roofing Assemblies with Combustible Above-Deck Roofing Components 2011 Edition

Chapter 1 Administration
1.1 Scope
1.2 Purpose
1.3 Application
Chapter 2 Referenced Publications
2.1 General
2.2 NFPA Publications
2.3 Other Publications
2.4 References for Extracts in Mandatory Sections. (Reserved)
Chapter 3 Definitions
3.1 General
3.2 NFPA Official Definitions
3.3 General Definitions
Chapter 4 Test Furnace
4.1 Furnace Construction
4.2 Burner Fuels and Supply Air
Chapter 5 Instrumentation
5.1 Thermocouples
5.2 Pressure Measurement
Chapter 6 Test Specimens and Conditioning
6.1 Blank Test Specimen
6.2 Calibration Specimen
6.3 Test Specimen
6.4 Conditioning
Chapter 7 Furnace Verification and Calibration
7.1 Verification of Operation Using Blank Test Specimen
7.2 Calibration Using Calibration Specimen
7.3 Preheating
7.4 Blank Specimen Test Procedure
7.5 Calibration Test Procedure
Chapter 8 Conduct of Tests
8.1 Calibration Using Calibration Test Specimen
8.2 Verification Using Blank Specimen
8.3 Testing
8.4 Acceptance Criteria
Chapter 9 Report
9.1 Data and Information
9.2 Calibration Information
9.3 Test Specimen Materials
9.4 Main Burner Fuel Flow
9.5 Flue Gas Temperatures
9.6 Auxiliary Burner Fuel Flow
9.7 Heat Release Rate
9.8 Visual Observations
9.9 Internal Component Description
9.10 Discussion of Performance
Annex A Explanatory Material
Annex B Informational References
Index