NFPA® 287 Standard Test Methods for Measurement of Flammability of Materials in Cleanrooms Using a Fire Propagation Apparatus (FPA) 2012 Edition

Chapter 1 Administration
1.1 Scope
1.2 Purpose
1.3 Symbols
1.4 Units
Chapter 2 Referenced Publications
2.1 General
2.2 NFPA Publications (Reserved)
2.3 Other Publications
2.4 References for Extracts in Mandatory Sections
Chapter 3 Definitions
3.1 General
3.2 NFPA Official Definitions
3.3 General Definitions
Chapter 4 Test Apparatus
4.1 General
4.2 Infrared Heating System
4.3 Load Cell System
4.4 Ignition Pilot Flame
4.5 Ignition Timer
4.6 Gas Analysis System
4.7 Combustion Air Distribution System
4.8 Water-Cooled Shield
4.9 Exhaust System
4.10 Test Section Instruments
4.11 Heat Flux Gauge
4.12 Digital Data Collection
Chapter 5 Calibration of Equipment
5.1 Radiant Flux Heater
5.2 Gas Analysis Equipment
5.3 Load Cell
5.4 Heat Release Calibration
Chapter 6 Test Specimens
6.1 Specimen Holders
6.2 Conditioning
6.3 Specimen Size and Preparation
6.4 Mounting Methods
Chapter 7 Test Procedure
7.1 Procedure 1: Ignition Test
7.2 Procedure 2: Combustion Test
7.3 Procedure 3: Fire Propagation Test
7.4 Safety Precautions
Chapter 8 Calculations
8.1 Critical Heat Flux (CHF)
8.2 Thermal Response Parameter (TRP)
8.3 Fire Propagation Index (FPI)
8.4 Effective Heat of Combustion (EHC)
8.5 Smoke Calculations
8.6 Convective Heat Release Rate
Chapter 9 Report
9.1 General Test Description and Ignition Test
9.2 Combustion Test
9.3 Fire Propagation Test
Annex A Explanatory Material
Annex B Background Material
Annex C Background Information on Exhaust System Option 2
Annex D Informational References
Index