NFPA® 302 Fire Protection Standard for Pleasure and Commercial Motor Craft 2010 Edition

Chapter 1 Administration
1.1 Scope
1.2 Purpose
1.3 Application
1.4 Retroactivity
1.5 Equivalency
1.6 Units
Chapter 2 Referenced Publications
2.1 General
2.2 NFPA Publications
2.3 Other Publications
2.4 References for Extracts in Mandatory Sections
Chapter 3 Definitions
3.1 General
3.2 NFPA Official Definitions
3.3 General Definitions
Chapter 4 Hull
4.1 General Arrangement
4.2 Spaces Open to the Atmosphere
4.3 Natural Ventilation
4.4 Connecting Compartments or Spaces by a Natural Ventilation System
4.5 Powered Ventilation System
4.6 Arrangements of Openings
4.7 Combustion Air
Chapter 5 Engines
5.1 Exposed Engine Surface Temperatures
5.2 Diaphragm-Type Gasoline Pumps
5.3 Marine Carburetors
5.4 Electrical Components
5.5 Air-Cooled Engines
5.6 Portable Gasoline Tanks
5.7 Automatic Shutdown
5.8 High-Tension Cable
5.9 Distributors
Chapter 6 Engine Exhaust Systems
6.1 General Requirements
6.2 Materials
6.3 Hose Connections
6.4 Temperature Protection
Chapter 7 Fuel Systems
7.1 General Requirements
7.2 Fuel Tank Materials
7.3 Fuel Tank Design and Construction
7.4 Fuel Tank Installation
7.5 Fuel Lines, Fittings, and Related Accessories
Chapter 8 Cooking, Heating, and Auxiliary Appliances
8.1 General
8.2 Cooking Appliance Installation
8.3 Coal, Charcoal, and Wood-Burning Appliances
8.4 Liquid Fuel Appliances Excluding Liquefied Petroleum Gas (LPG) Appliances
8.5 Liquefied Petroleum Gas (LPG) and Compressed Natural Gas (CNG) Systems for Permanently Installed Appliances
8.6 Service Water Heating Units and Cabin Heaters
8.7 Lamps
8.8 Electric Stoves
8.9 Portable Electric Heaters
8.10 Portable Dehumidifiers
Chapter 9 Electrical Systems Under 50 Volts
9.1 Scope
9.2 General Requirements
9.3 Batteries
9.4 Power Distribution System Negative Connections
9.5 Continuously Energized Parts
9.6 Marking
9.7 Ambient Temperature
9.8 Ignition Sources
9.9 Overcurrent Protection
9.10 Switches
9.11 Appliances and Equipment
9.12 System Wiring
9.13 Wiring Installation
9.14 Wiring Connections
9.15 Receptacles
9.16 Plug Connectors
Chapter 10 Alternating Current (ac) Electrical Systems on Boats
10.1 Scope
10.2 General Requirements
10.3 Marking
10.4 System Voltage
10.5 Ambient Temperature
10.6 Ignition Source
10.7 Shore Power Polarity Devices
10.8 Overcurrent Protection
10.9 Main Supply
10.10 Branch Circuits
10.11 Ground-Fault Circuit Interrupters (GFCIs)
10.12 Appliances and Equipment
10.13 Conductors and Flexible Cords
10.14 Installation
10.15 Receptacles
10.16 Main Panelboard
10.17 Alternating-Current (ac) Generators
10.18 Isolation of Galvanic Currents
10.19 Shore Power
10.20 Application of Types of Shore Power Circuits
Chapter 11 Lightning Protection
11.1 General
Chapter 12 Fire Protection Equipment
12.1 Fire Suppression Equipment
12.2 Smoke Detection
Chapter 13 Carbon Monoxide Detection
13.1 Carbon Monoxide Detection Systems
13.2 Installation
Annex A Explanatory Material
Annex B Portable Fire Extinguishers and Fixed Systems
Annex C Operation and Maintenance
Annex D Fire Warning Equipment
Annex E Extinguisher Inspection and Maintenance Information from NFPA Standards
Annex F Informational References
Index