Thank you for signing up for alerts.
The next edition of this standard is now open for Public Input.
1.1* Scope. This standard describes a method for determining the contribution of interior finish materials to room fire growth during specified fire exposure conditions. A.1.1 The performance of all wall and ceiling covering systems is addressed in this standard. Textile and expanded vinyl wall covering systems are included in this standard and they are also addressed specifically in NFPA 265, Standard Methods of Fire Tests for Evaluating Room Fire Growth Contribution of Textile or Expanded Vinyl Wall Coverings on Full Height Panels and Walls. Further information on testing of textile wall coverings can be found in Fisher et al., Room Fire Tests of TextileWall Coverings. Textile and expanded vinyl wall coverings are permitted by some codes (e.g., NFPA 101, Life Safety Code ) to be tested using NFPA 265. 1.1.1 This method is intended for the evaluation of the flammability characteristics of wall and ceiling interior finish, where such materials constitute the exposed interior surfaces of buildings. 1.1.2 This fire test method is not intended for the evaluation of fire resistance of assemblies, nor is it intended for the evaluation of the effect of fires that originate within a wall assembly. 1.1.3 This standard specifies three types of specimen mounting, depending on the application of the interior finish material, as follows: (1) Three walls (for interior finish to be used on walls only) (2) Three walls and the ceiling (for interior finish to be used on walls and ceilings) (3) The ceiling alone (for interior finish to be used on ceilings only)
Find a code or standard
© National Fire Protection Association (NFPA) 2016