Thank you for signing up for alerts.
The next edition of this standard is now open for Public Comment.
1.1 Scope. 1.1.1* This standard shall apply to dipping, roll coating, flow coating, curtain coating, printing, cleaning, and similar processes, hereinafter referred to as “coating processes” or “processes,” in which articles or materials are passed through tanks, vats, or containers, or passed over rollers, drums, or other process equipment that contain flammable or combustible liquids. A.1.1.1 Where a requirement applies to a particular process, the name of that process will be stated. 1.1.2 This standard shall also apply to cleaning processes that utilize a solvent vapor, such as vapor degreasing processes. 1.1.3 This standard shall also apply to processes that use water-borne, water-based, and water-reducible materials that contain flammable or combustible liquids or that produce combustible deposits or residues. 1.1.4 This standard shall not apply to processes that use only noncombustible liquids for processing and cleaning. This standard shall also not apply to processes that use only Class IIIB liquids for processing or cleaning, provided the liquids or mixtures thereof maintain their Class IIIB classification at their point of use. 1.1.5 This standard shall not apply to processes that use a liquid that does not have a fire point when tested in accordance with ASTM D 92, Standard Test Method for Flash and Fire Points by Cleveland Open Cup, up to the boiling point of the liquid or up to a temperature at which the sample being tested shows an obvious physical change. 1.1.6 This standard shall not apply to fluidized bed powder application. (See Chapter 15 of NFPA 33, Standard for Spray Application Using Flammable or Combustible Materials.)
This standard promotes industrial fire safety by providing safeguards to mitigate fire and explosion hazards of dipping, coating, and printing processes that use flammable or combustible liquids.
Parallel to the requirements in NFPA 33 for spray application, NFPA 34 provides rules for proper location, design, and construction of dipping, coating, and printing equipment; installation of electrical systems and control of ignition sources; ventilation; storage, handling, and distribution of flammable and combustible liquids; protection; operations and maintenance and training.
Find a code or standard
© National Fire Protection Association (NFPA) 2016