NFPA 22: Standard for Water Tanks for Private Fire Protection
Current Edition: 2013 Next Edition: 2018

Alerts: Receive e-mail updates on this document Manage my alerts

Alert Me
Please confirm you would like to be alerted the next time we post new information about document .
Alerts will be sent to the e-mail address on your user profile:

Thank you for signing up for alerts.

Committee members: Sign-in to view your documents.
Buy This Edition
NFPA 22:
2013 Edition
Item #: 2213
List: from $46.50
Member: from $41.85

Edition to display:
What is NFPA 22?
NFPA 22: Document Scope
1.1 Scope. This standard provides the minimum requirements for the design, construction, installation, and maintenance of tanks and accessory equipment that supply water for private fire protection, including the following: (1) Gravity tanks, suction tanks, pressure tanks, and embankment-supported coated fabric suction tanks (2) Towers (3) Foundations (4) Pipe connections and fittings (5) Valve enclosures (6) Tank filling (7) Protection against freezing.
This standard provides requirements for the design, construction, installation, and maintenance of tanks and accessory equipment that supply water for private fire protection. Official document scope
What does NFPA 22 address?
Coverage includes provisions for (1) gravity tanks, suction tanks, pressure tanks, and embankment-supported coated fabric suction tanks; (2) towers, (3) foundations; (4) pipe connections and fittings; (5) valve enclosures; (6) tank filling; and (7) protection against freezing.Table Of Contents.
NFPA 22, 2013 Edition: Archived Revision Information
Report on Proposals (ROP)
Report on Proposals (ROP)
Proposals can be submitted for text to be amended or included in NFPA Codes and Standards. Following the Call for Proposals period, the responsible Technical Committee or Panel holds a meeting to consider and act on all submitted proposals. The committee or panel may also develop its own proposals. A document known as the Report on Proposals (ROP) is prepared containing all the Public Proposals, Technical Committees' action on each Proposal, as well as all Committee-generated proposals. The ROP for the document in question is submitted for the approval of the responsible TC or Panel by a formal written ballot. If the ROP does not receive approval via written ballot in accordance with NFPA rules, the Report is returned to the committee for further consideration and is not published. If the necessary approval is received, the ROP is published in a compilation of Reports on Proposals issued by NFPA twice yearly for public review and comment, and the process continues to the next step. The ROP is published and widely distributed and anyone may download or request a copy.
ROP Meeting Notice
ROP Meeting Notice
Note: Please contact the appropriate staff liaison (listed on the Technical Committee tab) for information on attending an NFPA Technical Committee meeting as a guest. Read NFPA"s Regulations Governing Committee Projects (Section 3.3.3.3) for further information.
July 5, 2011, Telephone / Web Conference
June 22, 2011, Telephone / Web Conference
ROP Meeting Agenda
ROP Meeting Minutes
ROP Ballot
ROP Ballot
The ballots posted on this page are for public information only. Voting on ballots is permitted by committee members only. See NFPA Regulations Governing Committee Projects, Section 3.3.4.
Ballot (PDF, 643 KB)
Ballot Form (PDF, 362 KB)
Ballot Final (PDF, 74 KB)
Report on Comments (ROC)
Report on Comments (ROC)
Once the ROP becomes available, there is a 60-day comment period during which time anyone may submit a public comment on the proposed changes documented in the ROP. The committee or panel reconvenes at the end of the comment period and acts on all public comments. This committee or panel may also develop its own comments. As before, approval obtained via written ballot in accordance with NFPA's Regulations is required on all committee and panel actions. All of this information is compiled into a second Report, called the Report on Comments (ROC), which like the ROP, is published and made available for public review for a seven-week period.
ROC Meeting Notice
ROC Meeting Notice
Note: Please contact the appropriate staff liaison (listed on the Technical Committee tab) for information on attending an NFPA Technical Committee meeting as a guest. Read NFPA"s Regulations Governing Committee Projects (Section 3.3.3.3) for further information.
April 9 & 20, 2012 Telephone/Web Conferences
ROC Meeting Agenda
ROC Meeting Minutes
ROC Ballot
ROC Ballot
The ballots posted on this page are for public information only. Voting on ballots is permitted by committee members only. See NFPA Regulations Governing Committee Projects, Section 3.3.4.
Ballot (PDF, 515 KB)
Ballot Form (PDF, 90 KB)
Ballot Final (PDF, 64 KB)
Motions Committee Report (NITMAM)
Motions Committee Report (NITMAM)
Proposed NFPA documents will be presented for action at the applicable Annual (June) Association Technical Meeting only when proper Amending Motions (Notice of Intent to Make a Motion - NITMAM) have been certified by the Motions Committee of the Standards Council as a proper amending motion. Documents that receive no motions will not be presented at the meeting and instead will be forwarded directly to the NFPA Standards Council for action on issuance. More about the codes and standards making process including NITMAM.
No NITMAMs
Association Technical Meeting
Consent document not presented at Association Technical Meeting. Document issuance by Standards Council: 11/27/2012
Archived revision information
NFPA 22, 2013 Edition: Archived Revision Information
View archived proposals, comments and other records related to the development of this edition.
Read the archived revision information
Standards Council Decisions
View the document online (read only)

Find a code or standard

Bottom blue line

Free access     NEC      Sparky the Fire Dog        NFPA Conference & Expo         NFPA Journal         Sprinklers       Wildland fires