Sidewall venting into screened enclosuresFire Protection Research Foundation report: "Sidewall Venting Into Screened Enclosures"
Author: Filippo Gavelli, GexCon US
Date of issue: April 2012
"Sidewall Venting Into Screened Enclosures" (PDF, 3 MB)
Download the executive summary. (PDF, 108 KB)
* All Fire Protection Research Foundation reports can be downloaded for free. Printed copies are $50, except where otherwise noted. If all reports in a subject category are requested, a 20% discount applies. Please pre-pay by check or money order to the The Fire Protection Research Foundation. You may also pay using VISA, Mastercard or American Express. E-mail the Foundation or call +1 617 984-7443.
NFPA 54, the National Fuel Gas Code
, currently does not explicitly address installation requirements for appliance sidewall vent terminations located in screened-in enclosures. There is some concern that screen-in enclosures may impede the dispersion of combustion gases. There are many parameters that are, or could be, important in determining how flue gas will disperse in the real world and what the limits might be for safe venting in screened enclosures. These include: the appliance input rating, excess air, and efficiency which determine the combustion gas flow rate, temperature, and composition; the design and location of the sidewall vent terminal; the enclosure volume and screen mesh free area; and other factors such as wind speed and direction, outdoor ambient temperature, nearby topology, the presence of barriers such as nearby buildings, trees, and hills, the accumulation of lint from clothes dryers exhausting into the screen space(for dryer appliances). In 2011, the Foundation initiated a project to develop practical guidance on this issue.