NFPA is happy to announce the return of in-person debate and consideration of certified amending motions at the 2022 NFPA Technical Meeting (“Tech Session”) in Boston. Tech Session 2022 is planned to commence on Wednesday, June 8 at 1:00 p.m. with the presentation of Committee Service and Special Achievement Awards. At the conclusion of awards recognition, presentation and debate of certified amending motions will begin. In anticipation of increased participation and interest in cycling NFPA standards continuing, the 2022 event will consist of two days of debate and actions, concluding on Thursday, June 9. More details as to which certified amending motions will be debated and acted upon each day will be provided once the Motions Committee meets to finalize the agenda.
Technical Meeting
Please note: In general, the NFPA Standards to be presented for action at the 2022 Tech Session are those with amending motions submitted to NFPA in advance of the meeting and certified by the Motions Committee of the Standards Council. Please check back periodically for updates and additional important information. The complete technical committee records (First Draft Report and Second Draft Report) documenting all revisions created during the revision cycle and relative materials are accessible on the Next Edition tab of the specific document’s information page (e.g. for NFPA 70, National Electrical Code®, for NFPA 54, National Fuel Gas Code, etc.) for your review at any time. Anyone who has been a continuously active member of the association since December 10, 2021, and is registered for the 2022 Tech Session, will be eligible to vote on all CAMs.
Annual 2022 revision cycle
- May 2, 2022: Download this year's Report of the Motions Committee. The Report of the Motions Committee addresses six Annual 2022 Standards and one Fall 2021 Standard with Certified Amending Motions for consideration at the 2022 NFPA Technical Meeting: NFPA 25, NFPA 70, NFPA 86, NFPA 130, NFPA 285, NFPA 502, and NFPA 855; and provides a list of NITMAMs that were not certified and a list of NITMAMs requested by the submitter to be withdrawn.
- Withdrawal of CAM 70-17: Subsequent to the posting of the Motions Committee Report, one Certified Amending Motion for NFPA 70 (specifically, CAM 70-17) was requested to be withdrawn by the submitter. In accordance with the Regulations Governing the Development of NFPA Standards and the NFPA Technical Meeting Convention Rules, this CAM was approved by the Motions Committee for withdrawal.
- ATTENTION. Special Notice: Please be advised that a clerical error was identified in the Report of the Motions Committee and table of Certified Amending Motions which has now been corrected. Specifically, the table of certified amending motions, effects page, and ballot mistakenly identified CAM 70-129 to involve §334.104 and the failed reballoting of First Revision number 8435, rather than accurately referencing §330.104 and failed reballoting of First Revision number 8420. This has been corrected and included in the Report available at the link provided. Accuracy of the actions to be considered by the membership are of the utmost importance to NFPA and therefore we have reposted the corrected report in its entirety for your review to accurately reflect all actions available for pursuit at the Technical Meeting.
- April 11, 2022: Deadline for Notice of Intent to Make a Motion (NITMAM) on NFPA 70®, National Electrical Code® and NFPA 855, Standard for the Installation of Stationary Energy Storage Systems.
- March 9, 2022: Deadline for Notice of Intent to Make a Motion (NITMAM) on NFPA 1986, Standard on Respiratory Protection Equipment for Tactical and Technical Operations, and NFPA 1987, Standard on Combination Unit Respirator Systems for Tactical and Technical Operations.
- February 22, 2022: Deadline for Notice of Intent to Make a Motion (NITMAM) on Standards in Annual 2022 cycle.
- The following Annual 2022 Standards did not receive NITMAMs and have been issued as Consent Standards: NFPA 30B, NFPA 51, NFPA 52, NFPA 55, NFPA 88A, NFPA 301, NFPA 557, NFPA 715, NFPA 750, NFPA 780, and NFPA 1082.
- Withdrawal of NITMAM 2112-4: Subsequent to the NITMAM closing date, one NITMAM for NFPA 2112 (specifically, NITMAM No. 4) was requested to be withdrawn by the submitter. In accordance with the Regulations Governing the Development of NFPA Standards and the NFPA Technical Meeting Convention Rules, this NITMAM was approved by the Motions Committee for withdrawal. As a result of the Motions Committee action of NITMAM 2112-4, NFPA 2112, Standard on Flame-Resistant Clothing for Protection of Industrial Personnel Against Short-Duration Thermal Exposures from Fire, will be forwarded to the Council for balloting on issuance as a consent standard. Anyone wishing to appeal, may do so by April 7, 2022, to the Secretary, Standards Council in accordance with the Regulations.
- The following Annual 2022 Standards did not receive NITMAMs and have been issued as Consent Standards: NFPA 30B, NFPA 51, NFPA 52, NFPA 55, NFPA 88A, NFPA 301, NFPA 557, NFPA 715, NFPA 750, NFPA 780, and NFPA 1082.
Fall 2021 revision cycle
- October 12, 2021: The Report of the Motions Committee addresses one Fall 2021 Standard with Certified Amending Motions for consideration at the 2022 NFPA Technical Meeting: NFPA 285; and provides a list of NITMAMs that were not certified and a list of NITMAMs requested by the submitter to be withdrawn.