NFPA® 1981 Standard on Open-Circuit Self-Contained Breathing Apparatus (SCBA) for Emergency Services 2013 Edition

Chapter 1 Administration
1.1 Scope
1.2 Purpose
1.3 Application
1.4 Units
Chapter 2 Referenced Publications
2.1 General
2.2 NFPA Publications
2.3 Other Publications
2.4 References for Extracts in Mandatory Sections. (Reserved)
Chapter 3 Definitions
3.1 General
3.2 NFPA Official Definitions
3.3 General Definitions
Chapter 4 Certification
4.1 General
4.2 Certification Program
4.3 Inspections and Testing
4.4 Recertification
4.5 Manufacturers’ Quality Assurance Program
4.6 Hazards Involving Compliant Product
4.7 Manufacturers’ Investigation of Complaints and Returns
4.8 Manufacturers’ Safety Alert and Product Recall Systems
Chapter 5 Labeling and Information
5.1 Product Label Requirements
5.2 User Information
Chapter 6 Design Requirements
6.1 General Design Requirements
6.2 End-of-Service-Time Indicator (EOSTI) Design Requirements
6.3 Heads-Up Display (HUD) Design Requirements
6.4 Rapid Intervention Crew/Company Universal Air Connection (RIC UAC) Design Requirements
6.5 Power Source Design Requirements
6.6 Emergency Breathing Safety System (EBSS) Design Requirements
6.7 Accessories Design Requirements
Chapter 7 Performance Requirements
7.1 Airflow Performance
7.2 Environmental Temperature Performance
7.3 Vibration Resistance Performance
7.4 Fabric Flame Resistance Performance
7.5 Fabric Heat Resistance Performance
7.6 Thread Heat Resistance Performance
7.7 Corrosion Resistance Performance
7.8 Particulate Resistance Performance
7.9 Facepiece Lens Abrasion Resistance Performance
7.10 Nonelectronic Communications Performance Requirements
7.11 Heat and Flame Resistance Performance
7.12 Carbon Dioxide (CO2) Content Performance
7.13 Additional SCBA EOSTI Performance
7.14 Additional SCBA HUD Performance
7.15 RIC UAC Performance Requirements
7.16 Breathing Air Cylinder Performance Requirements
7.17 Supplementary Voice Communications System Performance Requirements
7.18 Heat and Immersion Leakage Performance Requirements
7.19 Low Power Capacity
7.20 Emergency Breathing Safety System Cold Temperature Performance Requirements
7.21 Lens Radiant Heat Resistance Performance
7.22 Elevated Temperature Heat and Flame Resistance Performance
Chapter 8 Test Methods
8.1 Airflow Performance Test
8.2 Environmental Temperature Tests
8.3 Vibration Test
8.4 Fabric Flame Tests
8.5 Fabric Heat Tests
8.6 Thread Heat Test
8.7 Accelerated Corrosion Test
8.8 Particulate Test
8.9 Facepiece Lens Abrasion Test
8.10 Nonelectronic Communications Test
8.11 Heat and Flame Test
8.12 Facepiece Carbon Dioxide Content Test
8.13 EOSTI Independent Activation Test
8.14 EOSTI Recognition Test
8.15 HUD Wiring Connection Strength Test
8.16 HUD Low Power Source Visual Alert Signal Test
8.17 HUD Visibility Test
8.18 HUD Obscuration Test
8.19 HUD Disabling Glare Test
8.20 Cylinder Refill Breathing Performance Test
8.21 RIC UAC System Fill Rate Test
8.22 Breathing Air Cylinder and Valve Assembly Retention Test
8.23 Cylinder Connections and Accessibility Test
8.24 Heat and Immersion Leakage Tests
8.25 Supplementary Voice Communications System Performance Test
8.26 Low Power Capacity Test
8.27 Emergency Breathing Safety System Cold Temperature Performance Test
8.28 Lens Radiant Heat Test
8.29 Elevated Temperature Heat and Flame Resistance Test
Annex A Explanatory Material
Annex B Surrogate Cylinder Preparation Procedure
Annex C Informational References